Woodpecker O LED Plus Light Cure Unit

6,199.007,500.00

48 in stock

  • Delivery available at all pincodes.
  • Delivery within 5-6 working days.
  • Free shipping on orders above Rs. 2500.
  • 100% purchase protection.
  • Original products | Secure payments.
Compare
  Ask a Question

Description.

Woodpecker O light plus light cure unit, a product from DTE Woodpecker provides high precision, high intensity focused light for effective polymerization of resin materials containing new style photo-initiators TPO. It is one of the most reliable light cure units and widely accepted by the dentist from all over the world.

Here are some key points:

  • Suitable for curing bleached resins & light- colored resins.
  • Suitable for curing Tetric-N-Ceram Bulk fill composite resin (Ivoclar), Amelogen Plus (Ultradent), ENA-Hri (Micerium), etc.
  • Upgraded a wide spectrum to cure all types of resin materials.
  • Upgraded focused light output with a reduction in angle of 55.87% allowing more concentrated energy and high curing efficiency.
  • Upgraded light intensity
  • Fluid design for better hand feeling
  • 360⁰ curing for better reach to every corner in the oral cavity.
  • Constant power output

Key Specification.

TECHNICAL SPECIFICATIONS:

Adapter InputAC 100~240V , 50Hz/60Hz
OutputDC 5V1A
High power Blue Light5W
Wavelength420nm~490nm
Size:268.8mm*26.1 mm*31.8mm
Intensity High:2300~2500 mw/cm2
Intensity Normal:1000~1200 mw/cm2
Net Weight :259g
 Battery Model: ICR 18490
Adapter InputAC 100~240V , 50Hz/60Hz
OutputDC 5V1A
Direction to Use.

STEP 1:

Switch on the LED Light Cure Unit with “Power Button”.

STEP 2:

Press the mode button to set the working mode, the corresponding indicator will on when a mode set.

Select the appropriate Time/Mode & start using the LED Light for curing

Features:
  • Anti-shock metal head which never cracks.
  • Size: 268.8mm×26.1mm×31.8mm
  • Net weight: 259g
  • Adapter input: AC100~240V 50Hz/60Hz
  • Wavelength: 385nm~515nm
  • 2 modes: High mode – 1 sec & 3 sec for curing resin ( suitable for orthodontic brackets, porcelain veneers, post-core adhesives), Standard mode – 5 sec, 10 sec, 15 sec, 20 sec ( suitable for regular curing of composite resin)
  • Light intensity: High: 2300~2500 MW/cm⊃2; Standard: 1000~1200 MW/cm⊃2;
  • Change of curing light from single blue light to blue-violet light, which can cure all types of resin materials.

Warranty.

  • Manufacturer/Importer warranty of 12 months as applicable for this product
  • Service and Warranty are handled by the manufacturer/importer directly for this product
  • DentaBaba will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
  • DentaBaba and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
  • Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and DentaBaba may assist the customer in registering a request to get the Product replaced or serviced. 
  • The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
Packaging:
  • 1 x  Main Unit of the LED
  • 1 x Light Hood
  • 1 x Adapter
  • 1 x Pedestal Charger
  • 50 x Disposable Light Cure Sleeves
  • 1 x Instruction Manual

 

 

dentalbaba products page image

Additional information

Brand

Woodpecker

Packaging

1 x Adapter, 1 x Instruction Manual, 1 x Light Hood, 1 x Main Unit of the LED, 1 x Pedestal Charger, 50 x Disposable Light Cure Sleeves

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

General Inquiries

There are no inquiries yet.

Shop By Category

Woodpecker O LED Plus Light Cure Unit

Woodpecker O LED Plus Light Cure Unit

6,199.007,500.00

Add to Cart